top of page

DiveTrack

JFD

Divetrack enables a Dive Supervisor to at all times, locate, monitor and re-task up to eight divers in the water. It has been designed from the ground up to be quick to deploy and simple for a Dive team to use.

 

Working with JFD’s Stealth Life Support System, DiveTrack provides real-time display of critical safety information keeping the Dive Supervisor always in the know.

Dive track components
divetrack on back

Situational Awareness
Surface to Diver Comms

Through-water communications remains a challenge for defence dive teams

Challenges include:

  • Security

  • Interference from other underwater sources

  • Difficulty hearing due to the underwater environment

  • Devices are often cumbersome and bulky

  • Cost and maintenance 

  • Training burden 

Proven through-water
communication data transfer

 with technologies adapted specifically for the Diving Industry

The Requirement

  • Diver communication is paramount to safety and mission effectiveness:

  • Dive coordination

  • Share info about location, depth

  • Communicate in low visibility / complex operations

  • Alert to problems / emergencies

  • Problem solving and adjusting dive plan

  • Data capture real time 

The Solution: DiveTrack

Dive Track uses GPS and acoustic signals to provide real time, safety critical, situational awareness.

 

The system enables the Dive Supervisor to locate, monitor and track up to eight divers at one time.

multi mission icon white

GPS

Location

acoustic icon

Acoustic Signals

monitor icon

Monitor

depth

sos icon

Trigger Alarm

in emergency

feather white icon

Lightweight
& rugged

System Features

​

  • DiveTrack uses GPS and acoustic signals to provide real time, safety critical, situational awareness. The system enables the Dive Supervisor to locate, monitor and track up to eight divers at one time.

  • The rechargeable DiveTrack transponder is capable connected to the rebreather which has an integrated monitor. Through simple buttons enables a diver to quickly share information and trigger an alarm in the event of an emergency. 

  • The DiveTrack USBL transceiver is small, lightweight and quick to deploy. Designed for shallow water. The DiveTrack Command Unit is a rugged and portable Peli-Case containing the intuitive Dive Track software which runs on a tablet over a built in Wifi or cabled connection. 

  • It has been designed to be quick to deploy and simple for a Dive Team to operate.

  • The system can be easily detached for conducting MCM operations as it doesn’t comply with non-magnetic requirements.

Incorporated as standard,

Upgrade ready.

​

The DiveTrack module is now incorporated into our new build Life Support Systems.

For those older systems which were not available with DiveTrack, we are able to offer upgrades to existing systems to allow them to benefit from this important and powerful new feature.  

DiveTrack: in action

divetrack kit

DiveTrack Transponder

Diver-mounted, rechargeable

transponder. Integrated depth

sensor for accurate positioning.

Cable-connect to JFD Stealth to

enable; Diver Information Sharing,

Diver alarm sharing and triggering

an audible dive abort signal.

GPS

Collocated GpS is fused with USBL acoustic

positioning to provide real-time situational

awareness.

JFD Stealth

Data link provided via the TST port

enabling the transfer of primary system

telemetry through water to the DiveTrack

Command Unit. The surface support

team has a real time visibility of diver LSE

system management.

DiveTrack USBL Transreciever

Small, lightweight and quick to deploy.

Provides acoustic tracking and simple

communication to multiple divers

simultaneously. Designed for shallow 

water.

DiveTrack Command Unit

All-in-one rugged topside solution; a

single case containing all that is 

needed and batteries to last 10 hours.

The intuitive software runs on tablet

over a built in Wi-fi or cabled

connection.

bottom of page